Quality Vehicle Equipment & Services | Equipment Specialists Inc (ESI)

Thanks for visiting our new website! We are currently undergoing improvements. Please click here to see our Parts Diagrams like our old site!

Shop

46303 items found.

All Products

- 46303 items

(Meyer) [08473C] PRES REL VALV W/BUSH-1PC

SALTDOGG 8 CUBIC FOOT TAILGATE SPREADER

TGS03

$ 2,919.20

The SaltDogg 8 Cubic Foot Tailgate Spreader is ideal for commercial applications using bulk salt (or a 50/50 salt/sand mix with the optional vibrator). It features a horizontal auger with a stainless steel trough and is compatible with 1/2 ton, 3/4 ton, and 1 ton trucks.

Product Common Use: Driveways, Parking Lots, Commercial Properties, Residential Areas

Capacity: 8 Cubic Feet
Fits: 1/2 ton, 3/4 ton, & 1 ton truck.
Material: Bagged Rock Salt, Bulk Salt

OIL LEVEL GAUGE WITH TEMPERATURE SIGHT GAUGE

LDR04

$ 19.08

WASHER FLAT 1/2IN SAE, ZINC

FWF050106010

$ 0.04

EXTRUDED RUBBER D-SHAPED BUMPER WITH 3 HOLES - 2-1/8 X 1-7/8 X 32 INCH LONG

D232

$ 24.72

150 AMP CIRCUIT BREAKER WITH MANUAL PUSH-TO-TRIP RESET WITH LARGE FRAME

CB151PB

$ 31.02

85X55X48 INCH BLACK STEEL L-PACK BACKPACK TRUCK BOX - 16.35 INCH OFFSET

BP855548B

$ 4,576.35

Heavy duty two-level box with two additional boxes provides ample ground-accessible storage.
Tough 15 Ga steel body and 10 Ga steel doors with a corrosion resistant black powder-coated finish.
Built-in shelves provide convenient storage and organization options.
Save time on installation with built-in frame mounting rails and two folding drivers side J-hooks.
Keep your equipment secure with locking stainless steel latches.
Automotive bulb seal keeps weather and dirt out of your box.
Made in the USA.
Buyers Products Black Steel L-Pack Truck Box with Offset Floor adds convenient and spacious storage behind the cab of your truck. The heavy duty two-level box features two additional bolt-on boxes to provide even more storage that's easily accessible from ground level. The box is ideal for use on flatbeds, stake bodies, dump bodies, and service bodies.

The truck box is built with a sturdy 15 Ga steel body and 10 Ga steel doors. A black powder-coated finish provides superior corrosion resistance and matches common service bodies. Thick door gaskets and locking stainless steel T-handle latches keep your tools dry and secure.

Installation is easy with built-in frame mounting rails.

2 AXLE BRAKE CONTROLLER

BC2A

$ 80.45

Quickly connects to your vehicle's trailer wiring.
Provides dependable braking control for light duty towing.
Will control brakes of 2 or 4 axle trailers.
Power settings are adjustable to your trailer needs.
Backed with a 3 year warranty.
Buyers Products 2 Axle Brake Controller provides reliable control for light-duty trailers with 2 or 4 electronic brakes.

A time-based controller applies braking power at a fixed rate that is not proportional to the amount of pressure applied to the brake pedal. It's a reliable, cost-effective approach that makes it great for towing small items like ATVs or riding lawn mowers.

The brake controller conveniently mounts beneath the dash, and quickly connects to the vehicle's trailer wiring. Its easy-to-adjust trim wheel lets you set the power level needed to brake. There is also a reset button that lets you opt for maximum power when you need it. Mounting bracket and hardware are included.

The brake controller is backed with a 3 year warranty.
Product Common Use: Trucks, Vans

D-RING ONLY 5/8IN DIA, 3IN X 3IN

B40R

$ 10.54

5/8 INCH FORGED D-RING WITH 4-HOLE INTEGRAL MOUNTING BRACKET

B40MP

$ 26.20

Four-bolt plate helps spread "pull" force to multiple anchor points.
Versatile uses across many applications.
Corrosion-resistant black powder-coated finish.
Strong forged steel construction.
D-rings are not approved for overhead use.
Not for lifting.
Buyers Products Bolt-On 5/8 Inch Forged D-Ring spreads the "pull" to the entire mounting plate instead of concentrating it on a single point. Its bolt-on design means you don't have to weld, so it's great for flat surfaces where welding is not an option.

The 5/8 in. diameter D-ring comes with a forged mounting bracket welded onto a steel plate. A black powder-coated finish adds durability and corrosion protection.

Mounting hardware and two back support bars are included. Be sure to check the capacity of the surface you are mounting prior to use.

D-rings are not approved for overhead use.
Product Common Use: Cargo Management, Flatbed Trailers

1/2 INCH ZINC PLATED SPRING LATCH ASSEMBLY WITH KEEPER

B2595LKB

$ 7.59

FORGED BUTT HINGE WITH 1/2 INCH PIN AND COTTER - 3.38 X 5.38 INCH

B2426E

$ 8.82

STRAIGHT WELD-ON STAKE POCKET - 1.5X3 INCH INSIDE X 4 INCH DEPTH

B2373K

$ 7.43

REPLACEMENT 18 INCH UNIVERSAL POLY COUNTERCLOCKWISE SPINNER FOR SALTDOGG® SPREADER 1471 SERIES

9240016

$ 104.65

SELF ADHESIVE MAGNETIC MOUNT PAD FOR ALUMINUM CABS (4 PACK)

8895404

$ 27.04

BLACK MOUNTING BRACKET FOR 5.125 INCH THIN MOUNT SURFACE MOUNT STROBE LIGHT

8892225

$ 13.11

QUAD SCREEN REAR OBSERVATION SYSTEM WITH BACKUP CAMERA

8883040

$ 343.35

INDIVIDUALLY PACKAGED 66063 YELLOW ZINC PLATED SNAPPER PIN

66064

$ 1.58

.75 INCH ROUND MARKER CLEARANCE LIGHTS - 3 LED RED WITH STRIPPED LEADS

5627514

$ 4.88

Wiring options include leads with blunt cut ends or .180 in. male bullet connector.
PC rated to produce light at a 90° angle left and right of center.
Mounting grommet is included.
Available in bulk (sold in multiples of 10) or individually with retail packaging.
Backed with a limited lifetime warranty.
Buyers Products 0.75 Inch Round Marker Clearance Lights with 3 LEDs are used on trucks and trailers to meet FMVSS/CMVSS 108 regulations.

The round marker lights are PC rated to produce light at a 90° angle left and right of center when properly mounted.

Lights are available in red or amber and mount with either blunt cut leads or .180 in. male bullet connectors.

Lights are available in bulk (sold in multiples of 10) or individually with retail packaging. They are backed with a limited lifetime warranty.
Product Common Use: Trailers, Service Vehicles, Dump Trucks, Work Trucks

4 INCH ROUND COMBINATION STOP/TURN/TAIL & BACKUP LIGHT KIT (INCLUDES GROMMET AND PLUG, SOLD INDIVIDUALLY)

5624131

$ 20.72

1.5 INCH CLEAR ROUND LICENSE/UTILITY LIGHT WITH 4 LED

5621534

$ 7.61

108 INCH 165-LED STRIP LIGHT WITH 3M? ADHESIVE BACK - CLEAR AND COOL

562109166

$ 80.26

60 DEGREE SIDE TARP JOINT

3036901

$ 25.43

WASHER, PLOW LIGHT SHOCK

3032927

$ 2.00

REPLACEMENT ADJUSTABLE ELECTRIC STAINLESS STEEL CHUTE ASSEMBLY FOR SALTDOGG® SPREADER 1400 SERIES

3030391

$ 1,700.61

SALTDOGG® GALVANIZED SPREADER STAND - 10 TO 11 FOOT

3027468

$ 5,886.07

Simplifies loading, unloading and storage of your full size municipal spreader.
Accommodates 10 ft to 15 ft spreaders, with or without pre-wet tanks.
Legs are adjustable to your bed height.
Built-in rollers make loading and unloading a spreader simple and smooth.
Sturdy structural steel construction.
Bolt-on or weld-on installation.
Buyers Products SaltDogg Galvanized Spreader Stand takes the hassle out of loading, unloading, and storing your 10 ft to 15 ft dump body spreader.

Built-in rollers on the sides and rear of the stand make it easy to line up the stand with your truck. The stand's legs can adjust to match your truck bed height, and the front legs fold up for quick loading. Just back your dump body truck into the stand following the included instructions and you'll be loaded up and ready to roll in minutes. See the video below for a demonstration of the stand in action.

The spreader stand features sturdy structural steel tubing construction. It has a hot-dipped galvanized finish for superior corrosion resistance and longevity.
Product Common Use: Salt Spreader Storage, Dump Body Changeouts

CHUTE POLY SHPE, STD LENGTH

3025063

$ 88.43

REPLACEMENT 12VDC .75 HP AUGER GEAR MOTOR FOR SALTDOGG® SPREADER PRO AND 1400 SERIES

3024575

$ 913.12

SPINNER PROTECTOR, ORANGE

3018923

$ 53.08

REPLACEMENT STAINLESS STEEL AUGER FOR SALTDOGG® SHPE SERIES SPREADERS

3018007

$ 251.21

RETAINER HOPPER TGSUV

3015788

$ 10.05

TROUGH ASSEMBLY TGS07

3015383

$ 901.47

REPLACEMENT 8 FOOT PINTLE CHAIN D667H

3014539

$ 612.32

REPLACEMENT 9 INCH SPINNER GEARBOX DISC FOR SALTDOGG® SPREADER TGS02 AND TGS06 2010/2011

3010970

$ 25.18

REPLACEMENT 1-1/2 INCH TAKE-UP BEARING

3010603

$ 46.95

REPLACEMENT 9 INCH POLY SPINNER FOR SALTDOGG® SPREADER TGS01, TGS05, TGSUVPRO

3005706

$ 27.83

REPLACEMENT 9 INCH POLY SPINNERFOR SALTDOGG® SPREADER TGSUV1A, TGSUV1B

3005705

$ 27.78

HANDLE, SPRING LATCH, 3/4 ZN

3000420

$ 6.51

REPLACEMENT 2-HOLE 1.5 INCH SET CREW LOCKING FLANGED AUGER BEARING

2F24SCR

$ 25.44

Maintain smooth operation with easily greasable design.
Durable one-piece cast iron housing increases bearing life.
Easy installation even in tight places.
Set screw design helps avoid shaft slippage.
Buyers Products Set Screw Locking Flange Bearing (2 Bolt) is built for long life with simple installation and maintenance.

The driveline-grade steel bearing is mounted in a cast iron housing, which helps make the flanges rugged and durable. The included grease fitting ensures ease of maintenance for continual smooth operation. The standard 2 bolt mounting design makes installation easy even in tight places. Its set screw design helps avoid shaft slippage.
Product Common Use: Remote Mount Hydraulic Pumps Shaft Driven Water Pumps , Shaft Driven Air Compressors , Shaft Driven Generators , Shaft Driven Water Pumps

Filters

View Cart

View Wishlist

My Account

Snow and Ice

Liftgates

Truck Bodies

Truck Equipment

Van Equipment

Shop

All Products

Pricelist :

Sort By :

Filters

Brand

Categories