Filters
Default
All Snow Plow Spreaders Clutch Pump Kits Liftgate Hoist Truck Bodies Lighting and Electrical Tarp Systems Van Equipment Truck Tool Boxes Towing Safety Apparel

Thanks for visiting our new website! We are currently undergoing improvements. Please click here to see our Parts Diagrams like our old site!

Shop
21 items found.
  1. Shop
  2. Spreaders
  3. Heavy Equipment - 21 items
Pricelist :
Web
Sort By :
Default
Filters
  • Brand
Categories
  • Capacity
  • Length
  • Engine Type
  • Gearbox Ratio
  • Spreader Discharge
  • Spreader Feed System
RESET
Smith Spreaders
SMITH DUMP BODY
SmithDumpBody
USD
The Smith Dump Body is available as a custom build. If you’re looking for a specific size or custom options. We offer our Dump Bodies with ALL 304 Stainless-Steel Construction, double sidewall construction, standard for a scissor style hoist. 2-7 yard capacities available. If you would prefer a custom Dump Body, Platform or Landscape design contact us for a quote.

ACCESSORIES & OPTIONS:
- Various gauge floor options
- Cab protectors
- Tarp rails
- Wood Deck
- Drop-side, barn door, side door, etc.

Capacity: 2-7 Cubic Yard
Fits: Cab & Chassis, Dump Cab, Municipal Vehicles
Hopper Material: Stainless Steel
Smith Spreaders
SMITH MEDIUM DUTY WIDE SPREADER
SmithMediumDutyWide
USD
The Smith Medium Duty Wide Spreader was designed for your medium duty range of trucks. Constructed of 304 stainless-steel for lasting durability, designed with Independent Contractors and Municipalities in mind. The customer that is seeking that bit of extra room will find this, the go-to spreader. Capacities ranging from 6 – 10.5 yards anything can be covered with these units. Our standard units are 52” in height and 83” wide, length of unit will vary from 8’ to 12’ depending on capacity needs. Available in Dual Electric or Dual Hydraulic.

Capacity: 6.0 - 10.5 Cubic Yard
Fits: Dump Trucks, Municipal Vehicles
Hopper Material: Stainless Steel
Smith Spreaders
SMITH UNDERTAILGATE SPREADER
SMITHUTG
USD
The Smith Under Tailgate Series of Spreaders are designed for low-maintenance high torque drive. Built with in a 96” length, easily installed on your Dump Body or Truck. This gives you the best of both worlds, allowing you to retain the use of the truck without removing the spreader. Just put the lid up to use as ice control and put the lid down for full use of the truck. The variety of choices is a key ingredient with this design, Hydraulic Direct Drive, Gear Box Drive, Chain Drive, or Electric. Using our consistent 304 Stainless-Steel construction, durability is never the issue. Our UT Series uses a screw auger cross conveyor, self-leveling, and a full drop trough for easy cleanout.

Fits: Dump Trucks, Municipal Vehicles
Hopper Material: Stainless Steel
Smith Spreaders
SMITH DUMP BOX AUGER SPREADER
SmithDumpBox
USD
Smith Metal Works of Newark introduced the next evolution of Dump Box Spreaders. Designed for Dump Bodies and Highway Department Dump Trucks, they are lightweight and easy to install through the coal chute. The simplistic design and easy installation make tackling those early or late ice storms no longer a challenge. Dual hydraulic motors and replacing the chain with an auger system leave minimum maintenance. Our auger design unloads evenly, maintaining the stability of the truck. All dump box auger spreaders include a galvanized screen.

Fits: Dump Trucks, Municipal Vehicles
Hopper Material: Stainless Steel
Smith Spreaders
SMITH SSV MUNICIPAL SPREADER
SmithSSV
USD
The Smith Stainless-Steel Municipal Spreader was designed for Municipalities, Highway & Thruway Authorities. Whether you are covering a county road or the freeway, this is the go-to spreader. This large capacity spreader constructed with the durability of 304 stainless-steel comes in a range of 5.8 yards to over a 14 yard struck capacity. Offering dual hydraulic motors, 83” width with either 53” or 65” height, and a variety of options including auger operation.

Capacity: 5.2 - 14.4 Cubic Yard
Fits: Dump Vehicles, Municipal Trucks
Hopper Material: Stainless Steel
Hilltip
HILLTIP ICESTRIKER LARGE COMBI SALT SPREADER
HillTipCombiLarge
USD
The Hilltip IceStriker™ 2000-6000 AM/CM is a 12V and 24V electric sand and salt spreader for trucks. The spreader can also optionally be equipped with a 6’7″ dual spray bar or a hose reel with hand-held spray nozzle.

Capacity: 2.0, 3.0, 3.5, 4.5, & 6.0 Cubic Yard
Fits: 1/2 Ton up to 15000 lbs GVWR.
Hopper Material: Poly
Spreading Material: Salt, Sand, Granulate/Mixed
Buyers
SALTDOGG ELECTRIC UNDER TAILGATE SPREADER
BUYELECUTG
USD
Buyers Products SaltDogg Electric Under Tailgate Spreader is an ideal choice for trucks that are not equipped with a central hydraulic system. It can spread bulk salt and 50/50 salt/sand mixes and works with 96 in. wide dump bodies.
Hilltip
HILLTIP ICESTRIKER TRACTOR SAND & SALT SPREADER
HILLTIPTRACTOR
USD
Hilltip IceStriker™ 12V electric tractor salt spreaders is made out of a lightweight poly hopper body and in stainless steel. The tractor salt spreader can easily be transformed into a brine sprayer or into a combi- spreader.

Capacity: 0.7 - 1.0 Cubic Yards
Fits: Tractors, Loaders, Equipment w/3-point Hitch
Hopper Material: Poly
Spreading Material: Salt, Sand, 50/50 Mix
Buyers
SALTDOGG MUNICIPAL COMBINATION DUMP SPREADER WITH DUAL AUGERS
BUYMDSDUAL1015
USD
Buyers Products SaltDogg® MDS Municipal Combination Dump Spreader with Dual Augers allows you to use a single piece of equipment year-round for municipal-quality spreading, dumping, and hauling. Unique features like roll-formed sides, a cross member-free floor, and a patented twin cylinder tailgate latch help the MDS stand out as an ideal multi-functional solution.

Product Common Use: Road and Highway Salt Application, Snow and Ice Control, Dump Applications
Buyers
SALTDOGG MUNICIPAL DUMP SPREADER WITH CONVEYOR CHAIN
BUYMDSCH0915
USD
SaltDogg MDS CH Municipal Combination Dump Spreader with Conveyor Chain allows you to use a single piece of equipment year-round for municipal-quality spreading, dumping, and hauling. Unique features like roll-formed sides, a cross member-free floor, and a patented twin cylinder tailgate latch help the MDS stand out as an ideal multi-functional solution.

Product Common Use: Road and Highway Salt Application, Snow and Ice Control, Dump Applications

Length: 9 ft - 15 ft
Material: Heavy/Wet Materials including sand, salt, gravel, or a mix
Buyers
SALTDOGG MEDIUM DUTY COMBINATION DUMP SPREADER
BUYMDS0911
USD
SaltDogg Medium Duty MDS Combination Dump Spreader keeps your fleet's Class 4-7 trucks working year-round. With 10 gauge 304 stainless steel construction, the combo body is designed to handle any job in any weather. One piece roll-formed radius sides provide a 3-4 cubic yard capacity. The double-acting Mailhot® cylinder gives powerful and reliable dump action. In the winter, the high speed pintle chain conveyor feed rapidly spreads salt, sand, or a 50/50 salt/sand mix. The versatile unit helps you get the most out of your trucks like the Ford® F-Series, Freightliner® M2 Series, International® CV™ Series, Chevrolet® Silverado™ Chassis Cabs, and RAM® Chassis Cabs.

Capacity: 3-4 Cubic Yard
Fits: Class 4-7 trucks
Material: Bulk Salt, Bulk Sand, 50/50 Salt/Sand Mix
Buyers
SALTDOGG 6-14 CU YD HYDRAULIC DUAL AUGER SPREADER
BUYHYDAUG0614
USD
SaltDogg 6-14 Cubic Yard Hydraulic Dual Auger Spreader gives contractors and municipalities a high-volume spreader with a heavy-duty dual auger. The spreader uses a truck's existing central hydraulic system. The 108 in., 120 in., 132 in., 144 in., or 168 in. hoppers are designed for dump bodies and flatbeds with a minimum 33,000 lb GVW (gross vehicle weight) chassis.

Product Common Use: Snow and Ice Control, Road and Highway Maintenance

Capacity: 6-14 Cubic Yard
Fits: Dump Bodies and Flatbeds with a minimum 33,000 lb GVW
Material: Bulk Salt, Bulk Sand, 50/50 Salt/Sand Mix
Buyers
SALTDOGG 7-13 CU YD HYDRAULIC CONVEYOR CHAIN SPREADER
BUYHYDCH0713
USD
SaltDogg 7-13 Cubic Yard Hydraulic Conveyor Chain Spreader gives municipalities and large contractors a high-volume, heavy duty spreader ready for use with a truck's existing central hydraulic system. The 108 in., 120 in., 144 in., or 168 in. hoppers are designed for 96 in. wide dump bodies and flatbeds with a minimum 26,000 lb GVW (gross vehicle weight) chassis.

Product Common Use: Snow and Ice Control, Road and Highway Maintenance

Capacity: 7-13 Cubic Yard
Fits: Dump Bodies and Flatbeds with a minimum 26,000 lb GVW
Material: Bulk Salt, Bulk Sand, 50/50 Salt/Sand Mix
Buyers
SALTDOGG 3.5-5.5 CU YD HYDRAULIC AUGER SPREADER
BUYHYDAUGHOPPER
USD
SaltDogg 3.5-5.5 Cubic Yard Hydraulic Auger Spreader gives contractors and municipalities a heavy duty, durable spreader that is powered by a central hydraulic system (not included). The hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis; depending on size of spreader. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix.

Product Common Use: Ice Control, Municipal Maintenance, Parking Lot Maintenance

Capacity: 3.5-5.5 Cubic Yard
Fits: dump bodies and flatbeds with a minimum 15,000 GVW
Material: Bulk Salt, Bulk Sand, 50/50 Salt/Sand Mix
Buyers
SALTDOGG 2.5 - 5.5 CU YD HYDRAULIC CONVEYOR CHAIN SPREADER
BUYHYDCHHOPPER
USD
SaltDogg 2.5-5.5 Cubic Yard Hydraulic Conveyor Chain Spreader gives contractors and municipalities a heavy duty, durable spreader designed to work with a truck's existing central hydraulic system. The 96 in., 108 in., or 120 in. hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix.

Product Common Use: Salt Spreaders, Municipal Spreaders, Road and Highway Maintenance

Capacity: 2.5-5.5 Cubic Yard
Fits: Dump Bodies and Flatbeds with a 15,000 lb to 19,500 lb GVW
Material: Bulk Salt, Bulk Sand, 50/50 Salt/Sand Mix
Buyers
SALTDOGG 2.5-5.5 CU YD ELECTRIC CONVEYOR CHAIN SPREADER
BUYELECCHHOPPER
USD
SaltDogg 2.5-5.5 Cubic Yard Electric Conveyor Chain Spreader strikes a balance between the convenience and value of an electric spreader and capacity typically only available in gas and hydraulic spreaders. The hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis; depending on size of spreader. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix.

Product Common Use: Snow and Ice Control, Road and Lot Maintenance

Capacity: 2.5-5.5 Cubic Yard
Fits: Dump Bodies and Flatbeds with a minimum 13,000 lb GVW (depending on model).
Material: Bulk Salt, Bulk Sand, 50/50 Salt/Sand Mix
Buyers
SALTDOGG 2.5-5.5 CU YD GAS CONVEYOR CHAIN SPREADER
BUYGASCHHOPPER
USD
SaltDogg 2.5-5.5 Cubic Yard Hydraulic Conveyor Chain Spreader gives contractors and municipalities a heavy duty, durable spreader powered by 10-1/2 HP Briggs and Stratton Intek Industrial/Commercial gas engine, with in-cab electric start throttle control. The spreader combines the power of a gas engine with modern spreader conveniences. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix. The hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis; depending on size of spreader.

*Spreader is shown with optional light bar (8891144) , and pre-wet system (LS1) which are sold separately.

Capacity: 2.5-5.5 Cubic Yard
Fits: Dump Bodies and Flatbeds minimum 13,000 lb GVW
Material: Bulk Salt, Bulk Sand, 50/50 Salt/Sand Mix
Western
WESTERN STRIKER SPREADER
WESTSTRIKER
USD
STAINLESS STEEL HOPPER SPREADER
Minimize waste and maximize profits with the WESTERN® Striker™ stainless steel hopper spreader. A dual variable-speed control and an innovative chute design allow operators to easily control salt and sand spread. Ultra-durable and loaded with the latest in snow and ice control technology, the Striker hopper spreader helps you take your de-icing operation further.

Capacity: 1.5, 2.0, 3.0, 4.5 & 6.0 cu yd
Construction: Stainless Steel
Fits: 3/4 & 1 Ton Pickups, Dump Body, Flatbed
Material: Salt & Sand
Western
WESTERN TORNADO POLY HOPPER SPREADER
WESTTORNADO
USD
For reliable, low maintenance performance, the WESTERN® Tornado™ hopper spreader has a variety of features built to put more control at your fingertips, delivering efficient salt and sand spreading operation. The rugged, one-piece poly broadcast spreader includes overlapping lids to provide unsurpassed protection for your salt or sand load.


Capacity: 1.5, 1.8 & 2.5 cu yd
FIts: 3/4 & 1 Ton Pickups
Construction: Poly
Material: Salt & Sand
Meyer
MEYER BASE LINE 960 UTG DUMP TRUCK SPREADER
64230
USD
For The Budget-Minded, Get Year-Round Performance From Your Dump Truck - The Meyer Base Line series of spreaders is designed to provide no-frill performance at a reasonable price. So whether you need to spread salt, sand or free flowing granular materials on ice and snow, the stainless steel Meyer Base Line BL-960 under tailgate spreader quickly and affordably ties into your dump truck’s central hydraulics system. Built with the same features as our Premium UTG fit for municipal vehicles, the BL-960 is an affordable, but powerful spreader. Lighter materials make it well-suited for contractors with medium-duty dump trucks.

Fits: Medium-Duty Dump Trucks (15,000 GVW and larger)
Hopper Material: Stainless Steel
Spreading Material: Salt, 50/50 Salt/Sand Mix, Sand, Free-Flowing Materials
Buyers
SALTDOGG SHPE4000CH 4.0 CUBIC YARD ELECTRIC POLY HOPPER SPREADER WITH CONVYOR CHAIN
SHPE4000
USD
Buyers Products SaltDogg SHPE4000CH Electric Poly Hopper Spreader is a powerful spreader designed for commercial and municipal use. The spreader works with dump trucks and flatbeds with a minimum 17,500 GVW (gross vehicle weight). The 4 cubic yard spreader handles bulk salt, sand, or a 50/50 salt/sand mix. Its electric-powered design means quieter operation that doesn't require refueling or engine servicing, giving you more time on the road.

Capacity: 4.0 Cubic Yard
Fits: Dump Trucks and Flatbeds with a minimum 17,500 GVW
Material: Bulk Salt, Sand, or a 50/50 Salt/Sand Mix