Shop

Thanks for visiting our new website! We are currently undergoing improvements. Please click here to see our Parts Diagrams like our old site!

81 items found.

(CM Truck Beds) [RD-04978434SD] RD 11'4" LENGTH HEADACHE RACK Steel Tube DECK 1/8" Treadplate FRAME RAILS 4" Structural Channel Steel CROSSMEMBERS 3" x 3/16" Channel REAR SKIRT Solid One Piece with Tapered Corners GN HITCH 30K B&W Hitch with Welded Ball BP HITCH 18,500 lb. B&W Hitch with Receiver Tube FUEL FILL Angled 12V TRAILER PLUG 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear REAR LIGHTING Clear LED Oval LIGHT BOX (REAR SKIRT) Steel MARKER LIGHTING Bullet DOT Approved LED

RD 11'4" LENGTH HEADACHE RACK Steel Tube DECK 1/8" Treadplate FRAME RAILS 4" Structural Channel Steel CROSSMEMBERS 3" x 3/16" Channel REAR SKIRT Solid One Piece with Tapered Corners GN HITCH 30K B&W Hitch with Welded Ball BP HITCH 18,500 lb. B&W Hitch with Receiver Tube FUEL FILL Angled 12V TRAILER PLUG 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear REAR LIGHTING Clear LED Oval LIGHT BOX (REAR SKIRT) Steel MARKER LIGHTING Bullet DOT Approved LED

RD-04978434SD

$ 5,096.81

GN Cover Lid

CMSK3

Rear Compartment Door for 15” or 18” Toolboxes - All Sizes are 15” Tall

CMSK2

Front Compartment Door for 15”, 24”, 36”, or 48” Toolboxes - All Sizes are 15” Tall

CMSK1

(CM Truck Beds) [RD-03976034SD-S] LENGTH 9'4", HEADACHE RACK Steel Tube DECK 1/8" Treadplate FRAME RAILS 4" Structural Channel Steel CROSSMEMBERS 3" x 3/16" Channel REAR SKIRT Solid One Piece with Tapered Corners GN HITCH 30K B&W Hitch with Welded Ball BP HITCH 18,500 lb. B&W Hitch with Receiver Tube FUEL FILL Angled 12V TRAILER PLUG 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear REAR LIGHTING Clear LED Oval LIGHT BOX (REAR SKIRT) Steel MARKER LIGHTING Bullet DOT Approved LED

LENGTH 9'4", HEADACHE RACK Steel Tube DECK 1/8" Treadplate FRAME RAILS 4" Structural Channel Steel CROSSMEMBERS 3" x 3/16" Channel REAR SKIRT Solid One Piece with Tapered Corners GN HITCH 30K B&W Hitch with Welded Ball BP HITCH 18,500 lb. B&W Hitch with Receiver Tube FUEL FILL Angled 12V TRAILER PLUG 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear REAR LIGHTING Clear LED Oval LIGHT BOX (REAR SKIRT) Steel MARKER LIGHTING Bullet DOT Approved LED

RD-03976034SD-S

$ 4,842.93

11' MEDIUM DUTY DROP BOX SINGLE DOOR

6401151

$ 6,394.00

Switch-N-Go® Arbor bodies with removable roofs are available in eight standard lengths, from 8 to 15 feet long, with volume capacities from 12.2 to 26.7 cubic yards. Additionally, Switch-N-Go® Arbor bodies with removable roofs are built with medium-duty build grade with two different heights (39″ or 51″) with options of variety of gate heights (51″, 39″ or 24″). These containers all come with our top-quality zinc prime & powder coated finish which is boosted by our triple stage wash to ensure proper curing and rust resistance.

With the Switch-N-Go® hoist system, your crew can work safely at ground-level by unloading the body to the ground. Easily use hand tools and wheelbarrows in a safe and comfortable position. Dropping a body to ground-level also allows you to load equipment like track loaders, motorized dumpers into your work truck body for easy transport, and material handling. Learn more about the advantages of a hoist system paired with a detachable truck body, and see how to supercharge your productivity and your business opportunities.

STAINLESS STEEL SIDE-WALL EXTENSION KIT FOR DUMPERDOGG® -USE WITH STAINLESS INSERT

5534020

$ 244.20

STAINLESS STEEL BOLT-ON CAB GUARD FOR DUMPERDOGG® -USE WITH STAINLESS STEEL INSERT

5534010

$ 1,012.94

BLACK STEEL SIDE-WALL EXTENSION KIT FOR DUMPERDOGG® -USE WITH STEEL INSERT

5531020

$ 201.87

BLACK STEEL BOLT-ON CAB GUARD FOR DUMPERDOGG® -USE WITH STEEL INSERT

5531010

$ 467.68

MOUNTING KIT, VIBRATOR, STEEL

3009255

$ 36.37

21x18x72 Inch Diamond Tread Aluminum Flatbed Contractor With Lower Door

1701578

$ 1,194.19

CM Truck Beds ALTM Aluminum Tradesman Body

CMALTM

Maximized storage and payload capacity are two of the many reasons that you will want to try our aluminum tradesman body. When you realize our storage and towing ratings, you will quickly see why the ALTM is the premiere choice for hard work.

CM Tuck Beds CBA Component Body

CMCBA

CM’s aluminum component style service body is perfect for the trades that look to CM for an innovative, lightweight service body. With our modular design, we are able to offer a more customizable design than any manufacturer on the market today, manufactured with a lighter weight material to maximize storage capacity.

CM Tuck Beds CB Component Body

CMCBC

CM’s industry leading component style service body is perfect for the trades that look to CM for the most innovative service body on the market today. With our modular design, we are able to offer a more customizable design than any manufacturer on the market today.

CM Tuck Beds HS Hotshot Body

CMHSH

With industry-best hauling capacity and loads of integrated standard features, the CM Hotshot is the complete hotshotting
solution. Rock-solid construction and smart components deliver the ultimate in safety, storage and durability

DUMPERDOGG® STAINLESS STEEL DUMP INSERT

Buyers Products DumperDogg Stainless Steel Dump Insert transforms your pickup truck into a dump truck, making it easier to transport and unload heavy, loose material such as mulch or stone. Built from 12 Ga stainless steel, the inserts will fit either a 6 ft or an 8 ft domestic truck bed on 3/4 ton and up pickups. Each insert has a payload capacity of up to 6,000 lb.

The DumperDogg Stainless Steel Dump Insert bolts to the frame of your vehicle and uses a powerful scissor hoist to provide a dump angle of up to 45º. The self-contained 3 HP power unit connects to the vehicle's electrical system to operate the power up/power down hoist. A body-up indicator kit is included to notify you when dump is in the upright position. The DumperDogg Stainless Steel Dump Insert has a tethered control box with a 10 ft cord so you can operate from a distance.

DUMPERDOGG® STEEL DUMP INSERT

Buyers Products DumperDogg Dump Insert transforms your pickup truck into a dump truck, making it easier to transport and unload heavy, loose material such as mulch or stone. Built from 12 Ga steel, the insert will fit either a 6 ft or an 8 ft domestic truck bed on 3/4 ton and higher pickups. Each insert has a payload capacity of up to 6,000 lb.

The multipurpose DumperDogg Steel Dump Insert has a double pivoting and removable tailgate. Four 3/4 in. quick release hinge pins allow the tailgate to open up or down for loading or unloading. The inserts can also be removed completely for easy access to the truck bed. These unique features ensure that you can still use your truck for transporting standard items, accommodating plywood sheets and pallets. A powder-coated steel structural frame keeps the integrity of the DumperDogg Steel Dump Insert for years of use.

SMITH DUMP BODY

SmithDumpBody

The Smith Dump Body is available as a custom build. If you’re looking for a specific size or custom options. We offer our Dump Bodies with ALL 304 Stainless-Steel Construction, double sidewall construction, standard for a scissor style hoist. 2-7 yard capacities available. If you would prefer a custom Dump Body, Platform or Landscape design contact us for a quote.

ACCESSORIES & OPTIONS:
- Various gauge floor options
- Cab protectors
- Tarp rails
- Wood Deck
- Drop-side, barn door, side door, etc.

Capacity: 2-7 Cubic Yard
Fits: Cab & Chassis, Dump Cab, Municipal Vehicles
Hopper Material: Stainless Steel

SH Truck Bodies Contractor Pickup Body

SHCPU

DURAMAG HD FLATBED BODIES

DURAFBHD

The DuraMag HD Series is strong enough to handle anything the truck is rated for and can be built to maximize your workday efficiency, with a straight truck or a dumping flatbed.

Designed for larger Class Trucks and Heavy Loads, the HD Series is now the best solution for lower GVW vehicles. These vehicles require aluminum bodies, as steel either consumes too much of the GVW or they’re forced to be underbuilt to allow minimal payload.

DURAMAG FLATBED BODIES: CAB CHASSIS

DURAFBCC

The DuraMag® Flatbed has ultimate flexibility.

You can add: Hoists for dumping, rack sides to restrain cargo, sideboards to fully enclose the sides and back, tarps, tool boxes (underbody and topside), D-rings for securing cargo, rear diamond plate aprons to dress it up a bit or additional headboard lights and strobes. The possibilities are limitless—and they all start with an economical base body that will outlast your truck.

Just need a basic replacement bed? The DuraMag® pickup delete is a favorite replacement body for rusted or damaged pickup beds. Great looks and function at an affordable price.

DURAMAG FLATBED BODIES: PICKUP DELETE

DURAFBPD

DURAMAG VAN BODIES - ENCLOSED MOWER

DURAVBEM

Integrated with the chassis of the vehicle, DuraMag Enclosed Mower Body is more maneuverable and secure than a typical trailer while still giving you the ability and versatility to haul a trailer when you have more to move.

EQUIPMENT SECURE AND ON THE MOVE
Out on the job, you can do more when your equipment is easy to access—and worry less knowing it’s safely enclosed. DuraMag Enclosed Mower Body is made to transport, load and unload valuable gear, and protect it from theft and damage. Stay organized and ready to respond with convenient, adjustable interior storage. Simplify transitions and avoid awkward bending with a sturdy extension ramp and generous side door. With its high-endurance, lightweight aluminum construction, DuraMag Enclosed Mower Body packs 2,500 lbs. of carrying capacity, while reducing gross vehicle weight for better fuel economy.

MULTIPLE PURPOSES

Landscaping and snow removal
Plumbing, HVAC, and other trades
Household moving and facility maintenance
ATV and cycling enthusiasts

DURAMAG VAN BODIES: DURAMAG SERIES

DURAVBDM

The DuraMag Series is designed primarily for Class 4 through 7 chassis. The DuraMag Series Van Bodies range from 10’-26’ in length and can handle any amount of cargo your truck is rated for.
The weight savings from engineered aluminum allows you to carry more cargo per load.

DuraMag® offers everything “cargo related” including: Scuff liners, E-track, all forms of cargo restraint, D-Rings, a variety of flooring options, rear door options, lift gates, walk ramps, side doors, attics, cargo racks, bumpers, and more.

DuraMag® builds in more features than any other manufacturer—100% pure high-strength aluminum; LED lights; bonded, rivetless side skins; 1/2” interior plywood; stainless steel fasteners on roll-up door—with the best warranty in the industry.

All this with a price that’s competitive with “standard steel models.”

DURAMAG VAN BODIES: DURALITE SERIES

DURAVBDL

Light in Weight, Not in Performance
The primary difference between DuraLite and DuraMag: Flooring Weight. Laminated hardwood flooring is heavy (5 lbs per square foot) and decreases value in many applications. Over the last decade, DuraLite’s aluminum flooring has proven to be the best solution when weight is a factor—approximately 45% lighter than the steel comparable—making it the ideal choice for all non-fork truck applications.

While the DuraLite is most popular in Class 2, 3 & 4 truck chassis (10’-18’ models), it’s imperative for Class 2 vehicles—Ford Transit, Ram ProMaster and Mercedes Sprinter. In these low GVW trucks, heavy hardwood flooring or heavy steel bodies consume most of the available GVW. Additionally, it’s hard on the truck and hard on profits to carry all that weight.

Strong, lightweight aluminum bodies save on fuel, wasted time at DOT weigh stations and vehicle wear and tear. They’re engineered to be super strong yet light enough to deliver the highest payload in the market.

DuraLite offers all the options that you’ll need: E-track, cargo restraint, D-Rings, rear door options, walk ramps, side doors, cargo racks, and more

DURAMAG CUSTOM BODIES

DURACB

At DuraMag®, we’re truck people. We know that cookie cutter doesn’t always work for every application, so we’ve created a dedicated Custom Line.

We can build just about anything you can imagine, however Custom builds have extended lead times. Custom jobs are unpredictable in complexity so delivery times can run as much as twice the standard delivery.

DuraMag® craftsmen fabricators are just that: craftsmen. You will love what they do. If you can live with a little longer build time, a custom body will often improve your work flow and productivity.

You tell us your requirements. DuraMag® can design whatever you can imagine. We will work with you to design a body to meet your needs. It starts with a conversation and ends with a product that optimizes your income.

DURAMAG DUMP BODIES

DURADB

DuraMag® Aluminum Dump Bodies are recognized as Best in Class: Stronger than your typical steel dump body with all the benefits of Aluminum: NO RUST, Eco-friendly, increased payload, better ride, approximately 10% fuel savings.

DuraMag® offers two versions of Dump Bodies to cover all your needs – the HD Smooth Side and Eco.

HD Smooth – DuraMag’s most common dump body
Eco – The DuraMag® Eco Dump Body is built for non commercial, lighter duty workloads

DURAMAG LANDSCAPE BODIES

DURALB

DuraMag® Landscape Bodies are built with all aluminum box tube construction. The standard headboard includes an expanded metal window and the frame is built using heavy duty long sills and cross members.

Smooth Side vs. Extruded Side
DuraMag® offers two models of Landscapes that can fit with your personal preference. The only difference between a Smooth Side and Extruded Side Landscape body is the type of aluminum used to build the walls.

DURAMAG CANOPY SERVICE BODY

DURASBC

The DuraMag® Canopy is an option that’s added to the base Service Body during production. The Canopy Body creates the ultimate enclosed mobile workstation. Securely transport your tools from job to job. Bad weather? Work inside!

DURAMAG S-SERIES SERVICE BODY

DURASBS

The DuraMag® Service Body is designed for continuous hard work with full length, heavy duty, long sills. What separates this body from the competition is the understructure; the difference is stunning. The general body construction is fully welded—never riveted or screwed together. Our proprietary door extrusions, coupled with compression latches and automotive bulb seals, produce the most watertight compartments available. The black polymer door latches are rivet-less for additional protection. All vertical compartments incorporate nitrogen struts to optimize performance in cold environments.

All DuraMag® bodies are fully powder coated. All lights are factory wired and installed.

DURAMAG R-SERIES SERVICE BODY

DURASBR

Designed Around Safety: The DuraMag® R-Series has all the same features as the S-Series but replaces the swing doors with roll-up/shutter style doors. These are premium, anodized aluminum doors that are customarily seen on high-end fire vehicles. Roll-up doors allow the user to work in a safer position without walking around swing-out doors extended into the street or walkway—no carrying tools out and around swinging doors. Optional Key Fob Locking system available.

EZ Dumper Stainless Steel Dump Inserts

EZSSDMP

Made from steel or stainless steel construction, EZ-Dumper® inserts are available in standard 8’ size with 2 cubic yard capacity to fit most full-size pickups, and smaller 6’ model with 1.5 cubic yard payload capacity available to fit most short-bed trucks. EZ-Dumper® inserts are designed and manufactured to perform.

EZ-Dumper® inserts are tough. EZ-Dumper® products are designed, engineered and manufactured to deliver dependable performance in tough conditions and extreme environments – the perfect solution for safely & efficiently moving any load from one jobsite to another.