Shop

Thanks for visiting our new website! We are currently undergoing improvements. Please click here to see our Parts Diagrams like our old site!

1196 items found.

HARNESS-WIRING, PLOW SIDE, ATV/UTV, V

MSC13788

$ 90.27

HARNESS-WIRING, PLOW SIDE, ATV/UTV

MSC13602

$ 73.79

(Boss) [MSC11327] BRUSH, INDISK, 3-1/2ODX3/4ID

CONTROL HARNESS CONVERSION KIT, VEH SIDE

MSC04758

$ 77.58

CONNECTOR, PIGTAIL 11PIN (VEH SIDE)

MSC03752

$ 50.59

The Smith Dump Body is available as a custom build. If you’re looking for a specific size or custom options. We offer our Dump Bodies with ALL 304 Stainless-Steel Construction, double sidewall construction, standard for a scissor style hoist. 2-7 yard capacities available. If you would prefer a custom Dump Body, Platform or Landscape design contact us for a quote.

ACCESSORIES & OPTIONS:
- Various gauge floor options
- Cab protectors
- Tarp rails
- Wood Deck
- Drop-side, barn door, side door, etc.

Capacity: 2-7 Cubic Yard
Fits: Cab & Chassis, Dump Cab, Municipal Vehicles
Hopper Material: Stainless Steel

SMITH MEDIUM DUTY WIDE SPREADER

SmithMediumDutyWide

The Smith Medium Duty Wide Spreader was designed for your medium duty range of trucks. Constructed of 304 stainless-steel for lasting durability, designed with Independent Contractors and Municipalities in mind. The customer that is seeking that bit of extra room will find this, the go-to spreader. Capacities ranging from 6 – 10.5 yards anything can be covered with these units. Our standard units are 52” in height and 83” wide, length of unit will vary from 8’ to 12’ depending on capacity needs. Available in Dual Electric or Dual Hydraulic.

Capacity: 6.0 - 10.5 Cubic Yard
Fits: Dump Trucks, Municipal Vehicles
Hopper Material: Stainless Steel

SMITH UNDERTAILGATE SPREADER

SMITHUTG

The Smith Under Tailgate Series of Spreaders are designed for low-maintenance high torque drive. Built with in a 96” length, easily installed on your Dump Body or Truck. This gives you the best of both worlds, allowing you to retain the use of the truck without removing the spreader. Just put the lid up to use as ice control and put the lid down for full use of the truck. The variety of choices is a key ingredient with this design, Hydraulic Direct Drive, Gear Box Drive, Chain Drive, or Electric. Using our consistent 304 Stainless-Steel construction, durability is never the issue. Our UT Series uses a screw auger cross conveyor, self-leveling, and a full drop trough for easy cleanout.

Fits: Dump Trucks, Municipal Vehicles
Hopper Material: Stainless Steel

SMITH DUMP BOX AUGER SPREADER

SmithDumpBox

Smith Metal Works of Newark introduced the next evolution of Dump Box Spreaders. Designed for Dump Bodies and Highway Department Dump Trucks, they are lightweight and easy to install through the coal chute. The simplistic design and easy installation make tackling those early or late ice storms no longer a challenge. Dual hydraulic motors and replacing the chain with an auger system leave minimum maintenance. Our auger design unloads evenly, maintaining the stability of the truck. All dump box auger spreaders include a galvanized screen.

Fits: Dump Trucks, Municipal Vehicles
Hopper Material: Stainless Steel

SMITH MEDIUM DUTY SPREADER

SmithMediumDuty

The Smith Medium Duty Spreader was designed for your medium-duty range of trucks. The full line of Smith Spreaders is constructed of 304 stainless-steel for lasting durability. Designed with Independent Contractors and Municipalities in mind. Capacities ranging from 3.5 yards up to our larger 6 yards, 46” or 52” in height and 70” wide. Length of the unit will vary from 8’ to 10’ depending on capacity needs. Dual Electric or Hydraulic with many options available.

Capacity: 3.5 - 6.0 Cubic Yard
Fits: Dump Trucks, Municipal Vehicles
Hopper Material: Stainless Steel

SMITH SSV MUNICIPAL SPREADER

SmithSSV

The Smith Stainless-Steel Municipal Spreader was designed for Municipalities, Highway & Thruway Authorities. Whether you are covering a county road or the freeway, this is the go-to spreader. This large capacity spreader constructed with the durability of 304 stainless-steel comes in a range of 5.8 yards to over a 14 yard struck capacity. Offering dual hydraulic motors, 83” width with either 53” or 65” height, and a variety of options including auger operation.

Capacity: 5.2 - 14.4 Cubic Yard
Fits: Dump Vehicles, Municipal Trucks
Hopper Material: Stainless Steel

SMITH SERIES IV PICKUP SPREADER

SmithSeriesIV

The Smith Stainless-Steel Series IV Spreader is another option for your pickup spreader application. Fabricated with the durable 304 Stainless-Steel our Series IV spreader was designed with our Small Business Commercial customers in mind. Ranging from 1-1/4 yards to 3 yards struck capacity, and a manageable 40” height and 50” width, fits your standard pickups used today. The perfect sizing for parking lots large or small. The lengths range from 68” to our longest length for this series of 120”. Whether you are looking for a dual electric or dual hydraulic this is the spreader for you. Standard issue with an on/off switch or upgrade with a dual speed control.

Capacity: 1-1/4 - 3.0 Cubic Yard
Fits: Standard Pickup Trucks
Hopper Material: Stainless Steel

SMITH SERIES II PICKUP SPREADER

SmithSeriesII

The Smith Series II Spreader was the first mass produced electric salt spreader. Designed originally for the Small Business Contractors in mind. Our Series II is constructed of 304 Stainless-Steel for long lasting durability our customers have grown to expect. The 12” removable chute gives ease for offloading unused material, towing a trailer or storing your spreader. This spreader has been in production for over 40 years and many of our customers still order parts for their 40-year-old units.

Capacity: 1-1/4 - 2 Cubic Yard
Fits: Standard Pickup Trucks
Hopper Material: Stainless Steel

SMITH MINI MAX AUGER SPREADER

SMITHMINIMAX

Our Mini Max Spreader is ideal for the Smaller Ice Control areas, whether your plan is to cover just your walkway or a larger model for the driveway. The Smith Mini Max Spreader comes in a range of sizes from the 1/4 yard up to our larger plus designs for 1-1/2 yards. You have the size flexibility ranging from a Gator to your standard pick-up.

Capacity: 1/4 - 1-1/4 Cubic Yard
Fits: Standard Pickup Trucks
Hopper Material: Stainless Steel

HILLTIP BRINEMIXX BRINE SOLUTION BLENDER

HillTipBrineMixx

BrineMixx™ 135-800 gal brine blender for IceStriker™ and SprayStriker™ liquid system. The BrineMixx™brine maker makes it easy to get the perfect water/salt solution for your de-icing purpose. The blender includes a pump that transfers the prepared liquid into the tank of your brine spraying device with a speed of 103 gpm. The blending tank and lid is made of durable polyethylene which gives you a rust and corrosion free lightweight product.

The BrineMixx™ brine maker is available in three different sizes, 135 gal, 370 gal and 800 gal.

HILLTIP TAILGATE BRINE SPRAYER

HILLTIPBRINEUTV

HILLTIP SPRAYSTRIKER LIQUID DE-ICING SPRAYER
SprayStriker 65 TR & 90 UTV De-Icing Sprayer for tractors, loaders, UTVs and pickup tailgate. The SprayStriker™ can be equipped with 40’ hose reel, 3 different widths of spray bars, as well as individually in-cabin controlled side-nozzles for increased spray width.

Capacity: 65 or 90 Gallons
Fits: Tractors, Loaders, UTVs and Pickups
Hopper Material: Poly

HILLTIP SPRAYSTRIKER LIQUID DE-ICING SPRAYER

HIllTipSprayStriker

SprayStriker™ 135-530 gal De-Icing, Anti-Icing & Brine Sprayer for trucks. The Hilltip SprayStriker™ brine sprayer can be used in different ways when fighting icy roads and large parking areas. The liquid de-icing sprayer is designed for maximum liquid tank capacity and for use on variety of vehicles, trucks and machines worldwide.

Capacity: 135, 265, 400 or 530 Gallons
Fits: Towable, UTV, Vans, Trucks and More
Hopper Material: Poly

HILLTIP ICESTRIKER LARGE COMBI SALT SPREADER

HillTipCombiLarge

The Hilltip IceStriker™ 2000-6000 AM/CM is a 12V and 24V electric sand and salt spreader for trucks. The spreader can also optionally be equipped with a 6’7″ dual spray bar or a hose reel with hand-held spray nozzle.

Capacity: 2.0, 3.0, 3.5, 4.5, & 6.0 Cubic Yard
Fits: 1/2 Ton up to 15000 lbs GVWR.
Hopper Material: Poly
Spreading Material: Salt, Sand, Granulate/Mixed

HILLTIP ICESTRIKER COMBI PICKUP

HillTipCombiPickup

IceStriker™ 1200-1500 AM combi salt spreaders for 1/2 to 1 ton trucks

Capacity: 1.0 & 1.5 Cubic Yard
Fits: 1/2, 3/4 & 1 Ton Trucks
Hopper Material: Poly
Spreading Material: Salt, Sand, Granulate/Mixed

HILLTIP ICESTRIKER PICKUP SAND & SALT SPREADER

HillTipPickupPoly

IceStriker™ 800-1150 poly hopper salt Spreader for 1/2 to 3/4 ton pickup trucks, utility vehicles.

Capacity: 0.7 & 1.0 Cubic Yard
Fits: 1/2 - 3/4 Ton Trucks
Hopper Material: Poly
Spreading Material: Salt, Sand, Granulate/Mixed

HILLTIP ICESTRIKER STAINLESS STEEL SPREADER FOR TRUCKS

HILLTIPSSTRUCK

The IceStriker™ 1000-3300 SSA/SSC series of 12/24V stainless steel salt spreaders are available in 1.0 to 3.3 cu yd capacities. The durable 12 gauge hopper is made in high quality AISI304 stainless steel.

Capacity: 1.0, 1.4, 2.0, 2.5 or 3.2 Cubic Yard
Fits: 1/2 - 3/4 Ton Trucks
Hopper Material: Stainless Steel
Spreading Material: Salt, Sand, Granulate/Mixed

MEYER RTG PREMIUM DUMP TRUCK SPREADER

MEYRTG

Turn Your Dump Truck Into A Salt Spreader - The Meyer Replaceable Tailgate spreader is a center discharge stainless steel, 12-volt electric powered spreader that reliably moves salt, sand or combination of both. It fits beds that are 84- to 90-inches in width and uses a self-contained auger to move the material. The Meyer RTG spreader easily replaces your existing tailgate and provides adequate ground clearance for the spinner mechanism. It uses a combination of a self-contained auger with removable spinners and can easily be added to any dump truck. It’s the perfect spreader for parking lots because its center drop allows for complete lane coverage.

Fits: Medium-duty Dump Trucks (15,000 GVW and larger)
Motor: Electric
Construction Material: Stainless steel
Spreading Material: Salt, 50/50 salt-sand mix, sand

HOTSHOT 70, 70 HD, 100 HD BROADCAST SPREADER

MEYHOTSHOT

Meyer’s premium Hot Shot broadcast spreaders were built to handle extreme conditions year-round and can hold 70 or 100 pounds of material with a maximum spread range of 12 feet to 18 feet, depending on the model. Heavy-duty models are made of stainless steel.

Capacity: 70lbs, 100lbs
Construction: Steel Frame or Stainless Steel Frame

SALTDOGG HYDRAULIC REPLACEMENT TAILGATE SPREADER

BUYHYDRTG

Buyers Products SaltDogg Hydraulic Replacement Tailgate Spreader is designed to install in place of the tailgate on 1 ton dump bodies. It is easy to mount and dismount and is ideal for dump bodies with low ground clearance. The spreader can handle bulk salt or a 50/50 salt/sand mix.

SALTDOGG ELECTRIC REPLACEMENT TAILGATE SPREADER

BUYELERTG

Buyers Products SaltDogg Electric Replacement Tailgate Spreader is designed to install in place of the tailgate of 1 ton dump bodies. It is easy to mount and dismount and is ideal for dump bodies with low ground clearance. The spreader can handle bulk salt or a 50/50 salt/sand mix.

SALTDOGG HYDRAULIC UNDER TAILGATE SPREADER WITH EXTENDED END PLATES

BUYEXHYDUTG

Buyers Products SaltDogg Hydraulic Under Tailgate Spreader with Extended End Plates is the perfect way for contractors and municipalities to convert their dump trucks into winter warriors. It can handle bulk sand, salt, and 50/50 salt/sand mixes and works with 96 in. wide dump bodies.

SALTDOGG HEAVY DUTY HYDRAULIC UNDER TAILGATE SPREADER

BUYHDHYDUTG

Buyers Products SaltDogg Heavy Duty Hydraulic Under Tailgate Spreader is the perfect way for contractors and municipalities to convert their dump trucks into winter warriors. It can handle 3/8 in. gravel in addition to bulk sand, salt, and 50/50 salt/sand mixes. The spreader works with 96 in. wide dump bodies.

SALTDOGG HYDRAULIC UNDER TAILGATE SPREADER

BUYHYDUTG

Buyers Products SaltDogg Hydraulic Under Tailgate Spreader is the perfect way for contractors and municipalities to convert their dump trucks into winter warriors. It can handle spreading bulk sand, salt, or 50/50 salt/sand mixes and fits 96 in. wide dump bodies.

SALTDOGG ELECTRIC UNDER TAILGATE SPREADER

BUYELECUTG

Buyers Products SaltDogg Electric Under Tailgate Spreader is an ideal choice for trucks that are not equipped with a central hydraulic system. It can spread bulk salt and 50/50 salt/sand mixes and works with 96 in. wide dump bodies.

HILLTIP ICESTRIKER TRACTOR SAND & SALT SPREADER

HILLTIPTRACTOR

Hilltip IceStriker™ 12V electric tractor salt spreaders is made out of a lightweight poly hopper body and in stainless steel. The tractor salt spreader can easily be transformed into a brine sprayer or into a combi- spreader.

Capacity: 0.7 - 1.0 Cubic Yards
Fits: Tractors, Loaders, Equipment w/3-point Hitch
Hopper Material: Poly
Spreading Material: Salt, Sand, 50/50 Mix

HILLTIP ICESTRIKER TAILGATE SPREADER

HILLTIPTAILGATE

The Hilltip IceStriker™ 45-100 is a 12V electric sand and salt spreader. It’s designed for pickup tailgates, vans, utility vehicles, tractors, loaders as well as forklifts. The tailgate spreader can spread all types of spreading materials like bulk, bag, sand and gravel. This salt and sand spreader is controlled wirelessly (Bluetooth) with the Hilltip StrikeSmart™ control App.

Capacity: 4.5, 7.5, or 10 Cubic Feet
Fits: Utility Vehicles, Pick-ups, Vans, Tractors, Loaders and Forklifts
Hopper Material: Poly
Spreading Material: Salt, Sand, Granulate, Mixed

MEYER UNDER TAILGATE PREMIUM DUMP TRUCK SPREADER

MEYUTG

Turn Your Dump Truck Into A Salt Spreader - The Meyer Under Tailgate (UTG) Premium Spreader has all the same great features and benefits of the Baseline 960, but it’s constructed with heavier gauge stainless steel, meaning it was built to take more of a beating. This unit doesn’t require you to replace your tailgate, so you can use the dump bed when the spreader is not in use. Meyer UTG Premium spreaders can apply salt, sand or combination of both, from four to 40 feet away on icy drives and snowy parking lots.

If your vehicle has a central hydraulics system and you want to use it to power your spreader, you need our hydraulic-driven UTG. It can be powered using a direct-drive or gearbox-drive system. Direct-drive gives you higher performance and decreased maintenance, while the gearbox-drive offers better control at low spread rates for more efficient spreading. For dump trucks without central hydraulics, or if you don’t want to use them to drive the spreader, you’ll want a Meyer electric UTG. Electric motors offer many ease-of-use advantages and are ideal for lighter, free-flowing materials.

Fits: Medium-duty Dump Trucks (15,000 GVW and larger)
Motor: Hydraulic or electric
Construction Material: Stainless steel
Spreading Material: Salt, 50/50 salt-sand mix, sand

MEYER POLYHAWK HOPPER SPREADER

MEYPOLYHAWK

Have It Your Way With A Polyhawk - Popular with contractors and other vocational users, the Polyhawk is powered by your choice of a Honda or Briggs & Stratton gas engines or a dual, 12-volt electric motor. The Polyhawk can even be operated by your vehicle’s central hydraulic system. Available in in 6' and 8' lengths, Polyhawks are perfect for spreading bulk materials like rock salt with sand mixed in it.

Capacity: 1.5 or 2.0 Cubic Yards
Motor: Briggs and Stratton, Honda, 12-volt dual electric, Central Hydraulic
Fits: 3/4-to-1 Ton Pickup Trucks
Hopper Material: Polyethylene
Spreading Material: Salt, 50/50 Salt/Sand Mix, Sand

MEYER CROSSFIRE HOPPER SPREADER

MEYCROSSFIRE

Better By Design And Backed By A 5-Year Warranty - The Crossfire was designed with extensive input from experienced end users looking for a better insert spreader. Each model has been designed to be easier to use, easier to maintain and easier on your vehicle. The Crossfire Deluxe was designed with an integrated pre-wet system.

Capacity: 1.5 or 2.0 Cubic Yards
Fits: 3/4-Ton Pickup Trucks
Hopper Material: Polyethylene
Spreading Material: Dry, Free-Flowing Rock Salt

MEYER ELITE UTV HOPPER SPREADER

MEYELITEUTV

Built To Make Your UTV A Year-Round Work Horse - Meyer's Elite UTV insert spreader is available in .3 and 4. cubic yards so it fits easily into the back of most utility vehicles. It's powered by a sealed 12-volt electric motor and features a stainless steel hopper which means less maintenance and less down time, so you can continually keep pathways and tight areas clear of snow and ice. Designed for contractor use, the Meyer Elite utility vehicle insert spreader allows you to spend less time adjusting or cleaning and more time on the job. It provides the best performance possible, every time you use it.

Capacity: 0.3 or 0.4 Cubic Yards
Motor: Briggs and Stratton, Honda, 12-volt Dual Electric, Central Hydraulic
Fits: Utility Vehicles
Hopper Material: Stainless Steel
Spreading Material: Salt, 50/50 Salt-Sand, Sand

MEYER ELITE CAB & CHASSIS HOPPER SPREADER

MEYELITECAB

Meyer offers eight different configurations in our Elite Cab & Chassis insert spreader line-up. All are built using fewer moving parts to keep you on the job spreading. Hoppers are made of stainless steel and are available in 8' and 10' lengths with 3.5 and 4.5 cubic yard capacities. Drive options include 10hp Brigg & Stratton gas, 11hp Honda gas, 12-volt dual electric or central hydraulics, so there's a model perfect for your municipality's fleet of trucks.

Capacity: 3.5 or 4.5 Cubic Yards
Engine: Briggs and Stratton, Honda, 12-Volt Dual Electric, Central Hydraulics
Length: 8' or 10'
Fits: Cab & Chassis
Hopper Material: Stainless Steel
Spreading Material: Salt, 50/50 Salt-Sand, Sand

MEYER BASE LINE 600 & 800 HOPPER SPREADER

MEYBASELINE68

Introducing A Reliable And Economical Spreader Line - Powered by a Briggs & Stratton or Honda gas engine or dual-electric 12-volt motor, the BL-600 and BL-800 insert spreaders feature a stainless steel inverted-V and drag chain conveyor system for even distribution of snow and ice removal material. The extra-large capacity hopper fits into short or long bed pickup trucks and is built to withstand anything Mother Nature can throw at it.

Capacity: 1.5 or 2.0 Cubic Yards
Motor: BL-600 - 6.5 HP Briggs and Stratton. BL-800 - 11hp Honda, 10.5hp Briggs & Stratton or 12-volt Dual Electric
Lengths: 5' (LPV), 6' (PV), 8' (PV)
Fits: Pickup Truck
Hopper Material: Stainless steel or Carbon steel (8' Briggs model only)
Spreading Material: Salt, 50/50 Salt/Sand Mix, Sand or Free-Flowing Granular Material

Filters

View Cart

View Wishlist

My Account

Snow and Ice

Liftgates

Truck Bodies

Truck Equipment

Van Equipment

Shop

Pricelist :

Sort By :

Filters

Brand

Categories

Side Height

Chain Length

Chain Links

Pitch Number

Center to Center

Bar Quantity

Bar Spacing

Bar Dimensions

Capacity

Material

Length

Engine Type

Vibrator

Extended

Adjustable Chute

Gearbox Ratio

Auger

Spreader Discharge

Hard Faced Auger

Controller

Spreader System

Spreader Feed System