All Snow Plow Spreaders Clutch Pump Kits Liftgate Hoist Truck Bodies Lighting and Electrical Tarp Systems Van Equipment Truck Tool Boxes Towing
  2. Shop
  3. Hopper
  4. SALTDOGG 1.5 CU YD 6 FT GAS HOPPER SPREADER

SALTDOGG 1.5 CU YD 6 FT GAS HOPPER SPREADER

BUYGASHOPPER6FT
BUYGASHOPPER6FT Buyers Buyers

SaltDogg 1.5 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix. The 6 ft hopper fits the beds of 3/4 ton and up trucks. With electric start and in-cab throttle control, the spreader combines the power of a gas engine with modern spreader conveniences. The spreader comes equipped with a 12V electric clutch and in-cab, 3 position momentary switch and throttle.

Product Common Use: Residential Spreading, Light Commercial, Driveways, Parking Lots

Capacity: 1.5 Cubic Yard
Fits: 3/4 ton, & 1 ton Trucks
Material: Bulk Salt, Bulk Sand, 50/50 Salt/Sand Mix

Please contact us for more information about this product.

Request a Quote
Terms and Conditions
Share this product:

Gas Spreader for Pickups

    Buyers Products SaltDogg 1.5 Cubic Yard Gas Chain Drive Stainless Hopper Spreader is powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with a battery for electric start. A heavy duty drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on start up.

    The hopper and fully welded frame are made from high quality 304 stainless steel for long lasting corrosion protection. The hopper also comes outfitted with a top screen. The spreader's steel pintle chain conveyor features a stainless steel inverted V design to reduce stress on the drive line and improve flow. The high-flow pintle chain conveyor is 12 in. wide and has a stainless steel floor. An adjustable feedgate with friction lock offers additional material flow control.

    A 12 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Adjustable baffles allow you to adjust the spread pattern to match your use.

    The SaltDogg 1.5 Cubic Yard Gas Stainless Hopper Spreader is comparable to Swenson® PV and Henderson® FSP.

SaltDogg 1.5 Cubic Yard

Standard Chute Model distributes spreading material from any regular 3/4 or 1 ton pickup truck, flatbed or dump truck.

  • Chute Primary Material304 Stainless Steel
  • ChuteStandardAdjustableExtendedStandard
  • Controller TypeIn-Cab Throttle/Choke
  • Discharge PositionCenter
  • Drive TypeGas
  • Hopper Length72.00 "
  • Hopper Material304 Stainless Steel
  • Number Of Motors1
  • Spinner MaterialPolyurethane
  • Works With Bagged #1 Rock SaltYes
  • Works With Bulk SaltYes
  • Works With Bulk SandYes
  • Works With Salt / Sand MixYes
  • Capacity1.50 yd³
  • Overall Height32.10 "
  • Overall Length91.70 "
  • Overall Width (At Top)47.00 "
  • Hopper Width47.00 "
  • Top ScreenYes
  • Drive Motor Horse Power10.50 HP
  • Vibrator Included?No
  • Spinner Diameter12.00 "
  • Spreading Width Range2 To 30 '
  • Gearbox Ratio20:1
  • System Voltage12 vdc
  • Feed MechanismConveyor Chain
  • Feed Mechanism212 in. Pintle Chain Conveyor

    • SaltDogg 1.5 Cubic Yard - Extended Chute

    The extended chute allows customers with a higher vehicle elevation to distribute materials closer to the ground.

  • Chute Primary Material304 Stainless Steel
  • ChuteStandardAdjustableExtendedExtended
  • Controller TypeIn-Cab Throttle/Choke
  • Discharge PositionCenter
  • Drive TypeGas
  • Hopper Length72.00 "
  • Hopper Material304 Stainless Steel
  • Number Of Motors1
  • Spinner MaterialPolyurethane
  • Works With Bagged #1 Rock SaltYes
  • Works With Bulk SaltYes
  • Works With Bulk SandYes
  • Works With Salt / Sand MixYes
  • Capacity1.50 yd³
  • Overall Height32.10 "
  • Overall Length91.70 "
  • Overall Width (At Top)47.00 "
  • Hopper Width47.00 "
  • Top ScreenYes
  • Drive Motor Horse Power10.50 HP
  • Vibrator Included?No
  • Spinner Diameter12.00 "
  • Spreading Width Range2 To 30 '
  • Gearbox Ratio20:1
  • System Voltage12 vdc
  • Feed MechanismConveyor Chain
  • Feed Mechanism212 in. Pintle Chain Conveyor

    • Quality Construction

    Hopper and fully welded frame made of high quality 304 stainless steel for long lasting corrosion protection

    Simple Controls

    12V electric clutch and in-cab, 3 position momentary switch and throttle

    Wide Broadcast

    12 inch poly spinner can broadcast materials up to 30 ft.

    Spreading Material

    Handles Bulk Salt, Bulk Sand, or 50/50 Salt/Sand Mix

    Extended Yes or No
    Accessory Products
    Recently viewed Products