All Snow Plow Spreaders Clutch Pump Kits Liftgate Hoist Truck Bodies Lighting and Electrical Tarp Systems Van Equipment Truck Tool Boxes Towing
  2. Shop
  3. Heavy Equipment
  4. SALTDOGG 3.5-5.5 CU YD HYDRAULIC AUGER SPREADER

SALTDOGG 3.5-5.5 CU YD HYDRAULIC AUGER SPREADER

BUYHYDAUGHOPPER
BUYHYDAUGHOPPER Buyers Buyers

SaltDogg 3.5-5.5 Cubic Yard Hydraulic Auger Spreader gives contractors and municipalities a heavy duty, durable spreader that is powered by a central hydraulic system (not included). The hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis; depending on size of spreader. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix.

Product Common Use: Ice Control, Municipal Maintenance, Parking Lot Maintenance

Capacity: 3.5-5.5 Cubic Yard
Fits: dump bodies and flatbeds with a minimum 15,000 GVW
Material: Bulk Salt, Bulk Sand, 50/50 Salt/Sand Mix

Please contact us for more information about this product.

Request a Quote
Terms and Conditions
Share this product:

HYDRAULIC SPREADER WITH AUGER

    The highly corrosion-resistant 304 stainless steel hopper features a fully-welded frame. It comes equipped with two hinged top screens with 1/4 in bars. The 5-1/4 inch variable-pitch auger is covered by an inverted V to reduce stress on the drive line and improve material flow.

    The conveyor chain is driven direct-drive hydraulic motor. The spinner is powered by a direct mount hydraulic motor. An 18 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing.

    Hydraulic spreader controls are sold separately. A variety of options are available, including manual hydraulic, manual with load sensing, and electric over hydraulic, available with or without GPS. See Accessories below.

    Pictured above with optional spreader stand (3037291) and to the right with optional pre-wet kit (LS1) sold separately.

Product Common Use: Ice Control, Municipal Maintenance, Parking Lot Maintenance

8' MODELS

  • Chute Primary Material304 Stainless Steel
  • ChuteStandardAdjustableExtendedAdjustable Height
  • Controller TypeNot Included
  • Drive TypeHydraulic
  • Hopper Length96.00 "
  • Hopper Material304 Stainless Steel
  • Number Of Motors2
  • Spinner MaterialPolyurethane
  • Works With Bagged #1 Rock SaltYes
  • Works With Bulk SaltYes
  • Works With Bulk SandNo
  • Works With Salt / Sand MixYes
  • Capacity3.50 yd³
  • Overall Height46.00 "
  • Overall Length116.00 "
  • Overall Width (At Top)70.00 "
  • Hopper Width70.00 "
  • Top ScreenYes
  • Vibrator Included?No
  • Spinner Diameter18.00 "
  • Spreading Width Range2 To 40 '
  • Feed MechanismFull Length Auger
  • Feed Mechanism25 1/4in. Variable Pitch Auger

    • 9' MODELS

  • Chute Primary Material304 Stainless Steel
  • ChuteStandardAdjustableExtendedAdjustable Height
  • Controller TypeNot Included
  • Drive TypeHydraulic
  • Hopper Length108.00 "
  • Hopper Material304 Stainless Steel
  • Number Of Motors2
  • Spinner MaterialPolyurethane
  • Works With Bagged #1 Rock SaltYes
  • Works With Bulk SaltYes
  • Works With Bulk SandNo
  • Works With Salt / Sand MixYes
  • Capacity4.00 yd³
  • Overall Height46.00 "
  • Overall Length128.00 "
  • Overall Width (At Top)70.00 "
  • Hopper Width70.00 "
  • Top ScreenYes
  • Vibrator Included?No
  • Spinner Diameter18.00 "
  • Spreading Width Range2 To 40 '
  • Feed MechanismFull Length Auger
  • Feed Mechanism25 1/4in. Variable Pitch Auger
  • Chute Primary Material304 Stainless Steel
  • ChuteStandardAdjustableExtendedAdjustable Height
  • Controller TypeNot Included
  • Drive TypeHydraulic
  • Hopper Length108.00 "
  • Hopper Material304 Stainless Steel
  • Number Of Motors2
  • Spinner MaterialPolyurethane
  • Works With Bagged #1 Rock SaltYes
  • Works With Bulk SaltYes
  • Works With Bulk SandNo
  • Works With Salt / Sand MixYes
  • Capacity5.00 yd³
  • Overall Height52.00 "
  • Overall Length128.00 "
  • Overall Width (At Top)70.00 "
  • Hopper Width70.00 "
  • Top ScreenYes
  • Vibrator Included?No
  • Spinner Diameter18.00 "
  • Spreading Width Range2 To 40 '
  • Feed MechanismFull Length Auger
  • Feed Mechanism25 1/4in. Variable Pitch Auger

    • 10' MODELS

  • Chute Primary Material304 Stainless Steel
  • ChuteStandardAdjustableExtendedAdjustable Height
  • Controller TypeNot Included
  • Drive TypeHydraulic
  • Hopper Length120.00 "
  • Hopper Material304 Stainless Steel
  • Number Of Motors2
  • Spinner MaterialPolyurethane
  • Works With Bagged #1 Rock SaltYes
  • Works With Bulk SaltYes
  • Works With Bulk SandNo
  • Works With Salt / Sand MixYes
  • Capacity4.50 yd³
  • Overall Height46.00 "
  • Overall Length140.00 "
  • Overall Width (At Top)70.00 "
  • Hopper Width70.00 "
  • Top ScreenYes
  • Vibrator Included?No
  • Spinner Diameter18.00 "
  • Spreading Width Range2 To 40 '
  • Feed MechanismFull Length Auger
  • Feed Mechanism25 1/4in. Variable Pitch Auger
  • Chute Primary Material304 Stainless Steel
  • ChuteStandardAdjustableExtendedAdjustable Height
  • Controller TypeNot Included
  • Drive TypeHydraulic
  • Hopper Length120.00 "
  • Hopper Material304 Stainless Steel
  • Number Of Motors2
  • Spinner MaterialPolyurethane
  • Works With Bagged #1 Rock SaltYes
  • Works With Bulk SaltYes
  • Works With Bulk SandNo
  • Works With Salt / Sand MixYes
  • Capacity5.50 yd³
  • Overall Height52.00 "
  • Overall Length140.00 "
  • Overall Width (At Top)70.00 "
  • Hopper Width70.00 "
  • Top ScreenYes
  • Vibrator Included?No
  • Spinner Diameter18.00 "
  • Spreading Width Range2 To 40 '
  • Feed MechanismFull Length Auger
  • Feed Mechanism25 1/4in. Variable Pitch Auger

    • Quality Construction

    Hopper and fully welded frame made of high quality 304 stainless steel for long lasting corrosion protection

    Prevent Damage

    Stainless steel adjustable inverted V improves flow and reduces stress on the drive line

    Reliable Operation

    Hydraulic motor with choice of 25:1, 50:1 worm gear box or 6:1 gear box.

    Wide Broadcast

    18 in. poly spinner with six fins broadcasts up to 30 ft

    Spreading Material

    Handles bulk salt, bulk sand, or a 50/50 salt/sand mix

    Available Controls

    Hydraulic spreader controls are sold separately. A variety of options are available, including manual hydraulic, manual with load sensing, and electric over hydraulic, available with or without GPS.

    Capacity 3.5 cu yd or 4.0 cu yd or 4.5 cu yd or 5.0 cu yd or 5.5 cu yd
    Length 8 ft or 9 ft or 10 ft
    Accessory Products
    Recently viewed Products